Open 24/7, 365 days a yearMinneapolis & St. Paul, MNCommercial Only
(651) 395-3422

Ice machine cleaning schedule: cleaning, sanitizing and water filtration

How often to clean and sanitize a commercial ice machine, scale versus slime, what manufacturers require and how water filtration helps.

(651) 395-3422
Quick answer

How often should a commercial ice machine be cleaned and sanitized?

Most manufacturers call for a full clean and sanitize at least every six months, and more often in hard water, high humidity or heavy use. Cleaning removes scale, sanitizing treats slime and microbes, and the two use different chemicals. Your model's manual sets the exact interval and the approved products.

What is the difference between cleaning, descaling and sanitizing?

These three words get used as if they mean the same thing, and on an ice machine they do not. Descaling, usually called cleaning in the manuals, uses an acid-based cleaner to dissolve mineral scale: the hard, chalky deposits left by calcium and magnesium in the water. Sanitizing uses a separate sanitizer solution to reduce bacteria, yeast, mold and the slimy biofilm that grows on wet surfaces. Washing is physical removal of dirt, which is what you do to the bin and the removable parts by hand.

The order matters. Scale is a rough surface that shelters slime, so you remove scale first. Sanitizer works poorly on a dirty or scaled surface. And you never mix cleaner and sanitizer: mixing the products can create dangerous fumes and ruins both. A proper clean runs the machine through a cleaning cycle with the descaler, rinses thoroughly, then runs a sanitizing cycle, then rinses again per the manual, and wipes the accessible interior with sanitizer.

Use only the products the manufacturer approves. Many ice machine evaporators are nickel-plated, and a general-purpose acid or a strong household product can strip the plating and ruin the machine. This is one of the more common ways a machine is damaged by well-meant cleaning.

What does scale look like, and what does slime look like?

Scale and slime are different problems and show up in different ways. Knowing which one you have tells you what to do about it.

Scale is a mineral problem. It shows as white, gray or tan crust on the evaporator plate, water distribution tube, float, probes and in the sump. It makes ice cloudy, can leave ice with a gritty taste, makes cubes smaller or irregular, slows the harvest and causes the machine to trip on safety limits. Hard water is the cause, and the Twin Cities metro has water that is moderately hard to hard in many areas. A filter and a regular descaling schedule is the answer.

Slime is a biological problem. It shows as pink, orange, black or clear slippery film in the bin, on the underside of the bin door and on the water curtain or splash shields. The pink is often a bacterium, and the black spots may be mold. Slime grows because the interior is wet, dark and slightly warm, and it thrives where air carries spores into the machine. Slime is a food safety matter. Ice is a food, and inspectors can and do look inside ice machines.

What you seeProblemWhat fixes it
White or tan crust on plates, tubes and floatMineral scaleDescale with the manufacturer's approved cleaner, then fit or replace the water filter
Cloudy, small or irregular cubesScale or poor water qualityDescale, check filtration and water supply
Pink, orange or slimy film in bin or on doorBacterial biofilmWash, sanitize and keep the bin door closed
Black spots on bin liner or gasketMoldClean, sanitize and replace damaged liners or gaskets
Musty smell or off taste in iceBiofilm, dirty bin or air filterFull clean and sanitize and clean the air filter

What do manufacturers generally require?

The exact interval is in your manual, and manuals differ by brand, model and water conditions. As a general pattern, the major makers, including Manitowoc, Hoshizaki, Scotsman and Ice-O-Matic, call for a cleaning and sanitizing of the ice-making system at a regular interval, commonly stated as at least twice a year, and shorter where the water is hard or the kitchen is greasy. Some give a longer interval with proper filtration, and some tie it to hours of operation or a cycle counter on the control.

Some machines include a cleaning reminder or a cleaning cycle on the control board that guides you through the descale and sanitize steps. Others require manual disassembly of the water distribution parts. Cleaning intervals also apply separately to different parts: the air filter and condenser need attention more often than the evaporator.

Ice machines built for the commercial market are commonly certified to NSF/ANSI 12, the standard for automatic ice making equipment, and the cleaning procedures in the manual are part of keeping that design safe in use. Following the manual is the best way to stay within what the machine was approved to do. Read the cleaning section of the manual for your exact model, and if you do not have the manual, the manufacturer posts them online by model number.

What should the cleaning schedule look like?

A realistic schedule has several layers. Daily and weekly tasks are operator tasks that keep slime out between full cleanings. The full descale and sanitize is the step many kitchens skip, and it is where a technician earns the visit because it is also a chance to inspect the machine, and a preventive maintenance visit can cover it.

Water quality drives the timing. A kitchen in a hard-water area with no filter may need the full clean far more often than a kitchen with good filtration. If you see scale returning quickly after each clean, shorten the interval and look at water treatment, not just the cleaning.

IntervalTaskWho
DailyKeep the bin door closed. Use a clean dedicated scoop kept outside the bin. Never put cases, glassware or hands into the ice.Operator
WeeklyWipe the exterior and bin door. Look for slime on the door gasket and bin liner.Operator
MonthlyClean or replace the air filter. Check the condenser on air-cooled machines for lint and grease.Operator
Per filter ratingChange the water filter cartridge on schedule or when pressure drops.Operator or technician
Every six months or per manualFull descale and sanitize of the ice-making system, bin and removable parts.Technician or trained staff
Annually or per manualInspect water valve, pump, probes, harvest timing, and check scale on the evaporator.Technician

How does water filtration help?

Water is the main ingredient in ice, and it determines almost everything else. A filter does several jobs depending on type. A sediment filter removes particles that foul valves and screens. A carbon filter removes chlorine and organic taste and odor compounds. A scale inhibitor reduces the tendency of hardness minerals to build up on the evaporator. None of these replaces cleaning, but they lengthen the time between cleanings and improve ice clarity and taste.

A filter only works if it is changed. Replace it on the schedule on the cartridge or when flow or pressure drops, whichever comes first. A clogged filter starves the machine of water and causes failed harvests and freeze-ups. Water pressure at the machine matters too: low supply pressure can cause the same symptoms as a failing inlet valve. The manufacturer lists the minimum and maximum supply pressure in the spec sheet, so check it at the machine rather than assuming.

If your water is very hard, a softener upstream is a plumbing job outside our scope, and a softener alone does not suit every machine, because some manufacturers prefer filtration with scale inhibition rather than fully softened water. Check the manual before installing treatment. If you are chasing production problems, the guide on an ice machine not making ice shows how scale and water supply fit into the diagnosis.

What goes wrong when cleaning is skipped?

Scale insulates the evaporator, so the machine takes longer to freeze and longer to harvest. It also coats the water level probes and thermistors, which then give false readings and trip shutdowns. Heavy scale can bridge ice across the evaporator and stall the harvest, which is a common cause of a machine that stops and shows a freeze-up or long cycle fault. Slime leaves ice tasting stale or musty and can be a health code finding.

Dirty air filters and condensers cause a hot refrigeration system, high head pressure, slow ice and a compressor that runs hard until it fails. The cost of a cleaning visit is small against a compressor or evaporator replacement. If you are not sure when the machine was last cleaned, assume it needs it. Our ice machine repair page explains the other failures a cleaning visit tends to catch early.

A safe sequence to follow

  1. Find the manual

    Look up your model's cleaning procedure and approved cleaner and sanitizer by model number.

  2. Empty the bin

    Discard all ice and take out loose parts the manual says to remove.

  3. Run the cleaning cycle

    Add the approved descaler in the quantity listed and run the cleaning cycle through.

  4. Rinse thoroughly

    Flush the system with clean water until no cleaner remains.

  5. Sanitize

    Run the sanitizing cycle with approved sanitizer and wipe accessible surfaces, never mixing it with cleaner.

  6. Replace filters and log it

    Change the water filter if due, clean the air filter and write down the date.

When to stop and call

  • Scale or slime comes back within weeks of cleaning.
  • Ice is cloudy, small, soft or tastes off after a full clean.
  • The machine stops on a freeze-up, long-cycle or water fault.
  • You cannot get descaler to circulate or parts will not come out.
  • You have no record of when the machine was last cleaned.

Questions about this problem

Can I use bleach to sanitize my ice machine?

Only if the manufacturer's manual allows it for your model. Many specify a particular sanitizer and concentration, and some products damage nickel-plated evaporators or leave residue. Use the approved product at the stated strength, and do not mix it with descaler.

Why is my ice cloudy?

Cloudy ice usually comes from dissolved minerals or air trapped in the water, along with scale on the evaporator. Descale, check the water filter and confirm the water supply pressure. Some cloudiness is normal for certain cube styles, so compare with how the machine behaved when new.

Do I need to clean the ice bin as well as the machine?

Yes. The bin is where slime and mold often start, because it is always wet. Wash and sanitize it with the rest of the system, and replace damaged gaskets or liners that hold moisture and contamination.

Does a water filter replace cleaning?

No. A filter reduces how fast scale and taste problems build, so you can go longer between cleanings. It does not remove slime that grows in the machine, so you still need the sanitize step on schedule.

What if the cleaning cycle will not start?

Many machines will not enter a cleaning cycle if the bin is full, a safety switch is open or the control is in a fault state. Clear the bin, check the manual for the right switch position and call a technician if the fault remains.

Sources

Call with the model and what it is doing

You hear the earliest opening on the phone. After the diagnosis you get a written price to approve before any repair starts.

(651) 395-3422
Call (651) 395-3422