Open 24/7, 365 days a yearMinneapolis & St. Paul, MNCommercial Only
(651) 395-3422

Bar and brewery equipment repair in the Twin Cities

Repair of back-bar coolers, draft refrigeration, glasswashers and taproom kitchen equipment for bars and breweries across the Twin Cities.

(651) 395-3422
Quick answer

Who repairs back-bar coolers and glasswashers for bars and taprooms?

We repair bottle coolers, back-bar refrigeration, direct-draw kegerators, glass frosters, glasswashers and taproom kitchen equipment on site. We diagnose first and give you a written price before any work starts. We do not service beer lines, gas regulators or brewing tanks.

Bars and Breweries: what is different

A bar runs on cold and clean. Beer has to be cold at the tap, bottles cold on the back bar, glasses clean and ice plentiful at the busiest hour of the night. The equipment that does this is mostly small refrigeration and one or two warewashers, and it works in a room full of sugar, spilled beer and bottle caps. That environment kills condensers, clogs drains and corrodes door hardware faster than a typical kitchen does.

Many Twin Cities taprooms and breweries also run a kitchen or a food truck partnership, so a single site can have back-bar and bottle coolers, a glasswasher, an ice machine and a small cooking line. We repair that equipment on site, and we give you a diagnosis and a written price first. Brewing vessels, glycol chillers on fermenters, beer line cleaning and CO2 systems are different trades, and we will say plainly where our scope ends.

Equipment that matters in bars and breweries

  • Bar Cooler & Kegerator Repair

    Back-bar bottle coolers and kegerators run constantly with the door opened every few seconds. Dirty condensers and worn gaskets are the common causes of warm beer.

  • Glasswasher Repair

    A glasswasher that leaves film or does not reach rinse temperature slows the whole bar. Scale, clogged wash arms and failed boosters are typical.

  • Ice Machine Repair

    Bars use more ice per seat than any restaurant, and a machine that makes half its rated output shows up as a dry well on a Saturday night.

  • Commercial Freezer Repair

    Under-bar freezers hold frozen mugs, garnish and kitchen stock, and the gaskets frost over fast in a humid bar.

  • Walk-In Cooler Repair

    A keg cooler is a walk-in with a very specific job. The temperature has to hold at the tap, and a failed evaporator fan can spoil kegs fast.

  • Commercial Fryer Repair

    Taproom kitchens lean on fryers and a small line. Thermostat and gas valve problems are the usual calls when a bar program serves food.

  • Display Case & Merchandiser Repair

    Some taprooms sell packaged beer, cheese or snacks from a glass-door merchandiser, which needs steady temperature and clean glass.

  • Commercial Coffee & Espresso Machine Repair

    Bars that open for brunch or coffee depend on an espresso machine with working boilers and pumps.

What shapes a repair visit here

Sugar and spill in the cabinets

Beer, syrup and juice end up inside back-bar coolers and on drain pans. Sugary residue gums up condensate drains and corrodes the coils and fan blades over time. When we repair a bar cooler we look at what is on the floor of the cabinet and the drain line, because the failure often started as a cleaning problem and will come back if only the part is swapped.

Doors opened constantly

A bottle cooler door is opened more times in a night than a restaurant reach-in is in a day. That wears hinges and gaskets and pulls warm, humid room air into the box, which frosts the evaporator. A gasket that looks fine can still leak at one corner, so we test the seal and do not just look at it.

Draft refrigeration and the keg path

Beer is only as cold as the system that carries it. Direct-draw kegerators, long-draw trunk lines and the glycol or air chilling systems that cool them are all separate pieces. We repair the refrigeration side of direct-draw coolers, because that is where the warm-beer calls usually start. Beer lines, faucets, regulators and CO2 are a draft technician's work, and we tell you early if that is where the problem sits.

Night hours and odd opening times

A bar is busiest when most service companies are off. Many taprooms are quiet in the morning and early afternoon, so a weekday visit before open is often easier than a weekend one. Tell us when the room is empty, who can let us in, and where the cooler and glasswasher sit so we can bring the right parts and tools.

Fitting the visit around the operation

Most bars and taprooms are empty before the afternoon, which makes a weekday morning or early afternoon the practical window for a repair. When you call we tell you the earliest opening we have, and where the schedule allows we can work around your hours. For a taproom with a kitchen, give us the kitchen's prep times as well. Have someone on site who can unlock the building, show us the equipment, and approve the written price.

Inspections and food safety

Bars with food service fall under the same Minnesota Food Code (Minn. Rules chapter 4626) as restaurants, so cold holding at 41°F or below and sanitized glassware and utensils matter at inspection. A glasswasher that does not sanitize, or a bottle cooler holding food, can draw a violation. Brewery production areas have their own rules, and we do not advise on those.

Brands we see most

Guides

Other kinds of operation

Bars and Breweries questions

Why is my back-bar cooler warm even though it is running?

Usually the condenser is packed with dust and lint, or the door gasket is torn and leaking. Clean the grille with a brush and vacuum with the unit unplugged, then check the gasket all the way around. If it still runs warm, the evaporator fan or the compressor needs diagnosis.

Do you fix kegerators and draft towers?

We repair the refrigeration side of direct-draw kegerators: compressor, evaporator fan, thermostat and gaskets. Beer lines, faucets, couplers, regulators and CO2 and nitrogen systems belong to a draft technician, and we will point that out when it is the real problem.

My glasswasher leaves white film on every glass. What is wrong?

That is usually mineral scale from hard water, or a rinse aid or detergent problem. Check that the chemical containers are not empty and descale the machine if the manufacturer allows it. If the film continues after that, the wash arms or the booster heater need a look.

Can you work on equipment in a brewery taproom kitchen?

Yes. We repair the fryers, ovens, ranges, coolers and dish machines in a taproom kitchen, and we diagnose before we quote. We do not repair brewing tanks, glycol chillers on fermenters, canning lines or any other production equipment.

How often should a bar ice machine be cleaned?

Follow the manufacturer's schedule for your model, and clean more often if the bar is busy or the room is dusty. Dirty ice is a food-safety concern, and a machine coated in slime also makes less ice. Our cleaning schedule guide explains what a cleaning cycle involves.

Sources

Call with the model and what it is doing

You hear the earliest opening on the phone. After the diagnosis you get a written price to approve before any repair starts.

(651) 395-3422
Call (651) 395-3422